Warn 91810 Manual Del Usuario página 6

8. INSTALLATION
(1) Push Tube Attach Bracket
Pin Holes
Figure 8: Place push tube bracket against the spine bracket and adjust until a set
of pin holes are less than 24 inches from the front of the forward facing tires.
10. INSTALLATION
(1) Adjustable rear contact plate
Figure 10: Slide adjustable rear contact plate onto spine plate to align with rear
u-bolts. Do not fasten at this time.
©2013 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
<24"
Pin Holes
9. INSTALLATION
(4) 3/8 - 16 x 3/4- Carriage Head Bolt
(4) 3/8 - 16 Locking Hex Nut
Figure 9: Loosely fasten push tube bracket to spine bracket with carriage bolts and
11. INSTALLATION
(2) 3/8 - 16 x 3/4- Carriage Head Bolt
(2) 3/8 - 16 Locking Hex Nut
Figure 11: Loosely secure rear contact plate to spine with carriage bolts.
6
locking nuts.
91853A1