Ega Master 57542 Manual De Instrucciones página 24

- Press
- If the wrench does not function normally,
Press
If the battery serial voltage is in low voltage status, the wrench will display a battery symbol
and then turn off after a while.
- If you use the different head of the wrench, the reading on the display will be different for the
different length of the head. Please refer to the following explanation.
D : The set torque
D1: The actual torque applied to the nut.
L1: The extended length
L2: The normal length
L3: The length from the fitting pin to the calibration point.
- Reference dimension for each model:
24
RESETTING THE WRENCH
together will reset the wrench.
together to reset the wrench.
LOW BATTERY VOLTAGE PROTECTION
WHEN CHANGING THE TYPE OF HEAD
Model
57585-57589
57586-57590
57588
57587-57591
57592
Calibration Point
L2(mm) L3(mm)
29 272.7
29 287.7
29 287.7
40 381.2
40 501.2