Putting Into Operation En - Abicor Binzel TCS Compact Manual De Instrucciones

TCS Compact
6 Putting into operation
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly and repair wor:
• Switch off the power source.
• Close off the compressed air supply.
NOTICE
• Note the following instructions:
 3 Product description on page EN-8
• Only qualified personnel are permitted to perform work on the device or system.
1 Injection hose connector
2
Suction air volume adjuster
3 Return hose
Fig. 8 Putting into operation
To put the welding torch injection unit into operation, the two hoses (3) and (7) have to be connected to the applicable
bottles. All other compressed air connections are mounted in the factory.
NOTICE
• Ensure that the non-return valve (5) is pre-attached to the suction hose (7).
BAL.0617.0 • 2021-05-20
8
7
6
5
4 Return flow bottle
5
Non-return valve
6 Anti-spatter fluid bottle (full)
7 Suction hose (mounted)
6 Putting into operation
1
2
3
4
8 Connection between the anti-spatter
fluid and injection unit
EN - 17