Abicor Binzel TCS Compact Manual De Instrucciones página 73

TCS Compact
11 Dismounting
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close off the compressed air supply.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Consult the documentation for the welding components.
• Note the following instructions:
 8 Putting out of operation on page EN-31.
12 Disposal
When disposing of the system, local regulations, laws, provisions, standards and guidelines must be observed. To correctly
dispose of the TCS Compact, it must first be disassembled. Please take note of the following information:
 Section 11 Dismounting on page EN-35
12.1 Materials
This product is mainly made of metallic materials which can be melted in steel and iron works and are, thus, almost infinitely
recyclable. The plastic materials used are marked in preparation for sorting and separation of the materials for later
recycling.
12.2 Consumables
Oil, greases and cleaning agents must not contaminate the ground or enter sewage system. These materials must be stored,
transported, and disposed of in suitable containers. Observe the relevant local regulations and disposal instructions in the
safety data sheets specified by the manufacturer of the consumables. Contaminated cleaning tools (brushes, rags, etc.) must
also be disposed of in accordance with the information provided by the manufacturer of the consumables.
12.3 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. Packaging materials are always selected
with regard to their possible recycling ability.
BAL.0617.0 • 2021-05-20
11 Dismounting
EN - 35