Video Camera/Games Console To Tv; Side Connections - Usb/Headphone; Digital Surround Receiver - Philips 26PFL5302D/37 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4

Video Camera/Games Console to TV

Next Source
TV
AV 1
AV 2
HDMI 1
HDMI 2
Side
3
Source Button

Side connections - USB/Headphone

Digital Surround receiver

Back of TV
Using Composite Audio/Video Input
& Connect the video cable (yellow) from the camera (or other devices) to
USB
the video input of the TV Side Jack panel.
Connect the S-video cable from the camera (or other devices) to the TV
Side Jack panel.
1
é Connect the red and white audio cables from the device into the audio
2
AV inputs of the TV.
1
Tip: For mono devices, connect only the white audio cable from the device's
audio output to the white audio input of the TV.
" Turn the TV and device on. Press the Source button on the remote
control until the connected source Side appears on the TV screen.
Press PLAY on the device to verify the connection.
Note: Interference will occur when S-video and Composite audio/video are
connected at the same time.
Headphone
&
Insert the plug into the headphone socket
é
Press the
loudspeakers of the TV.
The headphone impedance must be between 8 to 4000 Ohm. The headphone
socket is a 3.5 mm jack.
In the Sound menu, select
volume.
Viewing content from a USB device
Inserting a USB device
Note: USB devices are not supplied with this TV.
Insert a USB device in the
When a USB device is inserted, the Multimedia browser menu will be
displayed automatically.
Removing the USB device
&
First by switching off the menu. To do so, navigate to the Multimedia
browser menu and press the MENU button to exit the menu.
é
Remove the USB device.
Connect a Digital MultiChannel Surround receiver to the
(DIGITAL)
The TV can output Digital audio via the
connector to an external amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital Audio In,
you can connect it with a single cable to the TV's
23
OR
button on the remote control to switch off the internal
MUTE
Headphone volume
connector at the side of the TV.
USB
connector at the bottom of the TV.
AUDIO OUT (DIGITAL)
*
as shown.
to adjust the headphone
AUDIO OUT
.
AUDIO OUT (DIGITAL)

Publicidad

Tabla de contenido
loading

Tabla de contenido