How To Operate Your Monster 060 Mini Stick; Changing & Cleaning The Dust Cup FIlter - Euroflex Mini Stick Monster 060 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
10. The body case has special housings for its accessories, such as the brush (7) and the crevice nozzle
(8).

HOW TO OPERATE YOUR MONSTER 060 MINI STICK

1. Plug unit firmly into outlet.
2. Hold the hand vacuum firmly with your hand on the stick (11).
3. Push the Power Switch (3) to "¢Ò" position.
4. Start vacuuming.
CAUTION: The Hand Vacuum is a very powerful unit. Make sure that you hold it firmly, otherwise it can
slip out of your hand and get damaged or cause injury.
CHANGING & CLEANING THE DUST CUP FILTER
WARNING: Always unplug from electrical outlet before opening the dust cup (container) (5).
1. To open the dust cup (container) (5), push button (2) and pull out the dust cup (5), (see fig. 1).
2. Pull out the Dust Cup Filter (6), (fig. 2).
3. Empty the dust from the Dust Cup Filter (6).
4. Rinse the Dust Cup Filter (6) in cold water, and then wait until it dries up before replacing it into the
Dust Cup (container) (5).
5. Place the Dust Cup Filter (6) carefully into the Dust Cup (container) (5).
6. Attach the Dust Cup (container) (5) to the Hand Vacuum.
Fig.1
Fig. 2
Empty the dust cup and clean the filter after each use to avoid motor damages.
For the best maintenance of your appliance, clean it with a damp cloth and dry it carefully.
Do not use aggressive detergents that might damage the appliance.
CAUTION: The suction hole (1) must be open, free of any obstructions at all times. Otherwise, the motor
will overheat and could get damaged.
16

Publicidad

Tabla de contenido
loading

Productos relacionados para Euroflex Mini Stick Monster 060

Tabla de contenido