Set-Up And Assembly - Casada braintronics SKYLINER II Manual De Instrucciones

Set-up and Assembly

1. Assembling the armrest
From the arm rest, first remove the connectors and the air hose which match those on the frame of
•
the massage chair (Fig. 1).
Now link each connection with its counterpart (colour-coded). (Fig. 2).
•
Fig. 1
Insert the connecting parts on the underside of the frame firmly into the armrest connection. Cor-
•
rectly position the compressed air line. (Fig. 3).
After connecting with the appropriate connection lines, carefully insert the middle of the steel
•
pipe behind the steel frame manually into the lower part of the frame, making sure that the com-
pressed air line is not blocked or damaged. (Fig. 4).
Fig. 3
Now hang the bolt on the rear side panel (inner side) into the guide on the massage chair.
•
(Fig. 5)
Lock the front attachment of the seat in position and use slight pressure to hook this into place.
•
(Fig. 6)
24
Set-up and Assembly
Bolt
Use 2x (M5X10) screws to secure the front attachment. (Fig. 7).
•
Use 5x (M4x10) screws to secure the rear side of the side panel. (Fig. 8).
•
Fig. 2
Narrow side first, hook the covers into the side panel and then clip the mask onto the side panel.
•
(Fig. 9).
•
Fig. 4
Guide
Fig. 5
Fig. 7
From the inner side of the shoulder part, use one ST4,2x16 screw to secure the cover. When as-
sembling, the assembly instructions for the two side panels are identical. (Fig. 10)
Fig. 9
Fig. 6
Fig. 8
Fig. 10
25