Battery Replacement; Technical Data - DRAMINSKI 4QMAST Manual De Instrucciones

BATTERY REPLACEMENT

Under normal use, power consumption is very low and a 9 volt
alkaline battery will provide many thousands of tests.
Lower battery power is indicated by the icon flashing on the LCD. A
new battery is required when the icon starts flashing.
To change the battery:
1. Unscrew both screws which fix the small cover on the end of the
handle.
2. Remove the battery from inside the handle and unclip the battery
harness.
3. Clip the harness onto a new 9 volt or 9 volt alkaline battery, insert
the battery into the handle.
4. Replace the cover, ensure the rubber gasket is in place and tighten
the screws.
15

TECHNICAL DATA

Total weight:
Power:
Power consumption:
Display:
Smallest unit:
Measurement range:
Storage and work temperature:
Max. humidity:
Low - battery indicator:
approx. 300 gm
9 volt battery, standard or alkaline
approx. 14 mA
LCD 4 blocks of 3 digits
10 units
10 to 990 units
0 to 50° C
95%
blinking battery icon
16