Proper Installation; When Not In Use; Parts And Accessories - Haier QFW150 Serie Manual Del Propietário

SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

PROPER INSTALLATION

This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
Ensure that the hot water hose is connected to the "H" valve and the cold water hose is connected to the "C" valve.
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which could
cause permanent damage and invalidate the warranty.
Properly ground washer to conform with all governing codes and ordinances. Follow details in the Installation
Instructions.
Ensure washer is properly leveled and washer legs are adjusted such that unit is stable.
Optional drain hose extension recommended for discharging heights from 60" - 96".
Haier Appliances strongly recommends the use of factory specified parts. A list of factory hoses available for purchase
are listed. These hoses are manufactured and tested to meet Haier Appliances specifications.
Haier Appliances strongly recommends the use of new water supply hoses. Hoses degrade over time and need to be
replaced every 5 years to reduce the risk of hose failures and water damage.

WHEN NOT IN USE

Turn off water faucets to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses;
Haier Appliances recommends changing the hoses every 5 years.

PARTS AND ACCESSORIES

Visit our website at haierappliances.com/parts or in
Canada visit haiercanada.ca/parts.
READ AND SAVE THESE INSTRUCTIONS
4
Part Number Accessory
PM14X10002 4 ft rubber water supply hoses
Or
PM14X10005 4 ft braided water supply hoses
WX10X10011 Tide Washing Machine Cleaner*
®
PM7X1 Washer Floor Tray
®
*Tide is a registered trademark of Procter & Gamble
49-3000191 Rev. 1