Metra 99-2003 Instrucciones De Instalación página 7

1. Carefully unsnap trim panel above A/C controls.
(Figure A)
2. Remove (2) 7mm screws at the top of the radio/air
conditioning bezel, then unclip panel and remove.
(Figure B and C)
3. Remove (4) 7mm screws that hold the radio in,
slide radio out, unplug the radio harnesses and
remove radio. (Figure D)
Continue to radio bracket disassembly
(right side, page 7)
(Figure A)
Dash Disassembly 99-2003
Cadillac Fleetwood/Fleetwood Brougham 1990-1996
(Figure B)
(Figure D)
(Figure C)
7
Radio Bracket
Disassembly
1. Remove (4) 10mm nuts, (2) on top of the radio
and (2) on the bottom of the radio, that hold the
factory mounting brackets on. Save brackets and
nuts for use in kit assembly. (Figure A)
Continue to tab instructions
Top Factory Bracket
10mm nuts for removal
10mm nuts for removal
Bottom Factory Bracket
(Figure A)