Canyon 2004-2012; (With Ddin) 2002-2004; I280/I350; I290/I370 - Metra 99-2003 Instrucciones De Instalación

Chevrolet Blazer 2002-
2005/S-10
(with DDIN)
2004, GMC Sonoma
2002-2004, Oldsmobile

Bravada 1998-2001

1. Remove (2) 9/32" hex-head screws from the
knee bolster panel. (Figure A)
2. Pull down on the panel and remove the 9/32"
hex-head screws exposed on the bottom of the
dash trim bezel.
3. Remove (1) Phillips screw above the
instrument cluster.
4. Unclip the dash trim bezel and remove.
5. Remove (2)
9/32" hex-head
screws securing
the factory
head unit and
disconnect the
wiring.
Continue to tab
instructions
(Figure A)
Dash Disassembly 99-2003
Chevrolet Cavalier
2002-
(with DDIN)
1. Open drivers door and remove fuse panel on end of dash.
2. Open passenger door and remove panel on end of dash.
3. Remove (1) Phillips screw from each side exposed.
4. Remove (3) screws from top of glove box liner.
5. Remove (2) screws from the top-left corner of the glove
box cavity.
6. Remove (1) Phillips screw from the defroster duct.
7. Remove the duct work and (1) Phillips screw exposed.
8. Remove the dash pad and (3) Phillips screws exposed at
the top of the radio trim bezel.
Continue to tab instructions
8
1, 3
2000-2005
6, 7 8 8
4 5 4
8
Chevrolet Colorado/GMC

Canyon 2004-2012,

Isuzu i280/i350 2006

i290/i370 2007-2008

1. Unsnap and
remove the
entire panel
surrounding the
radio and A/C
controls.
(Figure A)
2. Remove (3)
9/32"screws
(Figure A)
securing the
radio to remove.
2, 3
(Figure B)
Continue to tab
instructions
(Figure B)