Kit Assembly; Double Din Head Unit Provision; Stacked Iso Head Unit Provision - Metra 99-2003 Instrucciones De Instalación

Double DIN head unit provision

1. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the unit for
proper operation.
2. Remove the center bar from DDIN trim plate.
(Figure A)
3. Attach the DDIN/stacked ISO brackets by aligning
the holes and securing the unit to the brackets
using the screws supplied with the unit. (Figure B)
4. Snap the bracket & unit assembly to the DDIN
trim plate. (Figure C)
(Figure A)
Kit Assembly (Double DIN)
All Vehicles
5. Reassemble dash in reverse order
of disassembly.
(Figure B)
(Figure C)
22

Kit Assembly

All Vehicles
Stacked ISO head
unit provision
1. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the unit for
proper operation.
2. Attach the DDIN/stacked ISO brackets by aligning
the holes and securing the units to the brackets
using the screws supplied with the units.
(Figure A)
3. Snap the bracket & unit assembly to the DDIN
trim plate. (Figure B)
4. Reassemble dash in reverse order
of disassembly.