Drive PreserveTech RTL12A001-GR Manual De Instrucciones página 3

2. Attach backrest supports
(C) to the underside of
the seat (A) by sliding
the "L" shaped sections
through the receptacles
on the bottom of the
frame. Push pins will
click into place when
secure.
3. Attach backrest (D) to
backrest supports (C) by
depressing push pins on
backrest and sliding into
place. Push pins will click
into place when secure.
4. Insert arms (E) into the
arm receptacles located
on the sides of the chair
by depressing push pins
and sliding into place.
Push pins will click into
place when secure.
5. To operate, simply pull up on the lever and begin to
swivel. The seat will automatically lock at 90° inter-
vals. The swivel shower chair can rotate a full 360° in
either direction.
• Before use, adjust height of each leg to your
specific needs, making sure all legs are at
the same height (denoted by the numbers on
each leg).
• When desired height is reached, lock legs into
place by aligning push pins into proper holes,
per illustration. Push pins will click into place
when secure.
adjusting leg height