Cleaning And Care; Technical Specifications - Sinbo SHC 4346 Manual Del Usuario

Prevent the trimmer from becoming damp.
After use, remove the hair clippings from the cutting head with the brush provided.
If the cutting head is used regularly, it should be oiled occasionally.
OILING THE CUTTING HEAD
Remove the guide comb from the trimmer.
Remove the cutting head by pushing it backwards as shown.
Press the white catch and squeeze one to two drops of oil between each
pair of cutting teeth.
Click the catch back into place and push it with the cutting teeth to and fro
to spread the oil.
Replace the culling head by sliding the cutting head clip into the notch on
the cover of the trimmer until you hear it snap into place.
Remove any excess oil by wiping with a cloth.
If the oil supplied with the trimmer should run out. use only acid-free oil
such as sewing machine oil.
REPLACING THE CUTTING HEAD
Use only original accessories. You can obtain accessories such as the cutting head, the
guide comb in specialist shops. Do not attempt to sharpen the cutting head yourself!
Switch the trimmer off! Replace the cutting head as described under "Oiling the cutting
head".
REPLACING THE ACCUS
The appliance has nickel metallic hydride accus. If they supply power for only a short
period after charging, you can replace them.
Use one accus of the type size AA, 1.2V.
Always replace both accus at the same time.

TECHNICAL SPECIFICATIONS

Watts: 2W
Voltage: AC200-240V 50HZ
FEATURES
• Cordless operation
• Stainless steel blades
• Built in Ni-Cd battery
• 8 Hours charging time
• Indication light in blue color

CLEANING AND CARE

- 9 -