Dremel 7350 Instrucciones De Funcionamiento página 35

1605A000DGAB 02-21 7350_7300-PGT 6/2/21 9:21 AM Page 35
used for polishing plastics,
metals, jewelry and small
parts. Also included in this
group is a polishing com-
pound (No. 421) for use with
the felt and cloth polishers.
Polishing points make a very
smooth surface, but a high
luster is obtained using felt or
cloth wheels and polishing
compound. For best results
polishing accessories should
be used
greater than 15,000 RPM.
No polishing compound is
needed when using the 425
Polishing Wheel.
Aluminum Oxide Abrasive
Wheels
Use to remove paint, deburr
metal, polish stainless steel
and other metals. Available in
medium grit. 1/8" shank.
Sanding Accessories
Sanding bands in fine, medi-
um and coarse grades are
made to fit mandrel No. 402
and EZ407. They can be used
for nearly any small sanding
job you might have, from
model making to fine furni-
ture finish ing. In addition,
at speeds not
there is the drum sander, a
tiny drum which fits into the
Rotary Tool and makes it pos-
sible to shape wood, smooth
fiberglass, sand inside curves
and other diffi cult places, and
other sanding
replace the sanding bands on
the drum as they become
worn and lose their grit.
Bands come in fine medium
and coarse
Flapwheels grind and polish
flat or contoured surfaces.
They are used most effective-
ly as a finishing sander after
heavier surface sanding and
material removal is complet-
ed. Flapwheels come in fine
and coarse grades. Buffs are
a great finishing accessory for
cleaning and light sanding.
They work effectively on
metal, glass, wood, aluminum
and plastics. Coarse and
medium buffs are sold togeth-
er. All buffs are sold individu-
ally. Do not exceed 15,000
RPM in speed. 1/8" shank.
Grinding Wheel
Use for deburring, removing
rust, and general purpose
grinding. Use with Mandrel
#402.
jobs. You
grades.
35