Connecting The Power Supply - Aqualytic XD 7500 Guia De Inicio Rapido

EN
English
Connect the
power pack
10
1
3.2.2

Connecting the power supply

CAUTION
The line voltage of the usage location must fulfill the specifications
stated on the power pack (the specifications are also given in Chapter 8
T ). Always use the supplied 12 V original power pack
ECHNICAL DATA
only.
Before plugging in the power cable check whether it is undamaged.
If the power cable is damaged, the instrument must not be operated.
1
1 Turn the photometer upside down
and place it on a soft surface.
2 Open the lid of the battery
compartment (1).
3 Insert the four batteries in
the battery compartment.
The ± indicators in the battery
compartment must match the
± indicators on the batteries.
4 Close the lid of the battery
compartment.
1 Connect the miniplug of the power
pack to the socket (1) of the
photometer.
2 Connect the power pack to an
easily accessible power outlet.
ba77203y01
XD 7500
09/2017