Preparation Before Operation; I Indoor Unit; How To Operate - Panasonic CS-C12ATP5 Manual Del Usuario

PREPARATION BEFORE OPERATION

I Indoor Unit

1
Connect the power supply cord to an independent
power supply.
5

HOW TO OPERATE

3
2
5
I To start the operation
• Press 1.
• POWER indicator (green) on the indoor unit will light
up.
• To stop, press once more.
I Setting Mode
• Press 2 to select:-
Cooling Model
AUTO – Automatic Operation
COOL – Cooling Operation
DRY – Soft Dry Operation
FAN – Air Circulation Operation
Heat Pump Model
AUTO – Automatic Operation
HEAT – Heating Operation
COOL – Cooling Operation
DRY – Soft Dry Operation
I Setting Temperature
• Press 3 to increase or decrease the temperature.
• The temperature can be set between:
Cooling Model
Heat Pump Model : 16°C ~ 30°C
• Recommended temperature:
Cooling Model
1
COOL – 26°C ~ 28°C
4
DRY –
6 lower than the
room temperature
• During AUTO Operation, press 3 to select:-
• Operation with 2°C higher than the standard
temperature.
• Operation with the standard temperature.
• Operation with 2°C lower than the standard
temperature.
G Standard Temperature
Indoor
temperature
24°C
• Once the Automatic Operation is selected, the indoor
temperature sensor operates automatically to select
the desired operation mode with Cooling or Soft Dry.
• After the operation mode has been selected, the
mode does not change.
Indoor
temperature
25°C
21°C
• At the beginning of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected according
to the indoor temperature.
• After the operation mode has been selected, the
mode does not change.
: 20°C ~ 30°C
Heat Pump Model
COOL – 26°C ~ 28°C
DRY – 1°C ~ 2°C
1°C ~ 2°C
lower than the
room temperature
HEAT – 20°C ~ 24°C
Cooling Model
Standard
Operation temperature
Cooling 27°C
Soft Dry 24°C
Heat Pump Model
Standard
Operation temperature
Cooling 27°C
Soft Dry
24°C
Heating 22°C