18
83. Rotate the upper console bezel (1) and disconnect the
wiring harnesses (2).
84. Remove the upper console bezel (1).
85. Remove the two fasteners (2) from the storage bin (1).
86. Remove the storage bin (1) by pulling rearward.
87. Obtain the kit supplied DVD power harness (1) and us
ing a fishtape or equivalent, feed the harness through
the front overhead console opening in the headliner.
Route the harness down the Apillar into the instru
ment panel and across to the center stack area.
88. Dual screen kit installation, obtain the kit supplied
secondary DVD power harness (2) and using a fish
tape or equivalent, feed the harness through the front
overhead console opening in the headliner. Route the
harness down the Apillar into the instrument panel
and across to the center stack area.
Dec 30, 2011
K6861508