Nexgrill 790-0016 Manual De Propietario página 4

IF MISSING OR DAMAGED PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-
Most grill models will use the motor mount
brackets 4A & 4B provided. Follow Step 1 -
Step 6 for installation. If your grill is pre-
equipped with a side baffle notch for the
rotisserie unit, use item number-5 (motor
mount bracket) and skip to Step 7.
Step 1
Open grill hood and remove the cooking grates.
Refer to the Owner's Manual for your grill for
instructions on grate removal.
Step 2
Attach the motor mount bracket labeled 4B on
the left hand side of the grill using
two "M5x10mm" screws, "M5" washers and "M5"
nuts. See Illustration-1.
Note: Motor mount bracket 4B may need to
be turned around in order to fit properly
on certain grills.
Step 3
Attach motor mount bracket 4A to
bracket 4B using one "M6x10mm" screw as
shown. Keep the screw loose until height
adjustment has been set (Step 6). See Illustration 2.
Step 4
If a notch on the right side of the grill does not exist
for your spit rod, attach the spit rod support
bracket to the outside of the grill on the right using
two "M5x10mm" screws, "M5" washers and "M5"
nuts. (Two sets of holes may be provided
depending on the model of your grill.)
Step 5
Using a combination of the spit rod sections
provided, securely assemble the spit rod to a
length that will rest on both the motor
mount bracket to the spit rod bracket. The two
longer sections must be the end pieces. Fit the
shorter piece(s) in between the longer ones to
elongate the spit rod as necessary to fit the width of
your grill. See Illustration 4.
8999. PROOF OF PURCHASE WILL BE REQUIRED.
INSTALLATION INSTRUCTIONS
Illustration-1
4B
Illustration-2
Illustration-3
Illustration-4
Side Baffle
Mounting Holes
Notch