Nexgrill 790-0016 Manual De Propietario página 5

IF MISSING OR DAMAGED PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-
8999. PROOF OF PURCHASE WILL BE REQUIRED.
INSTALLATION INSTRUCTIONS
Step 6
To set the proper height for your motor mount
Right Support
bracket, place the rotisserie motor on the
Bracket
motor mount bracket. Then place the spit rod
on the motor and slide the bracket adjustment
up or down until the spit rod is level. After the
height adjustment has been made, tighten the
motor mount bracket 4A to bracket 4B with a
"M6x10mm" screw. See Illustration 5.
Illustration-5
For Grills pre-equipped with a side baffle notch,
use the following installation instructions.
Step7
Open grill hood and remove the cooking grates.
Refer to the Owner's Manual for your grill for
instructions on grate removal.
Step 8
Attach the motor mount bracket on the left
hand side of the grill body by using two "M6 X
Illustration-6
10mm" screws. See Illustration-7. The
mounting screw holes are located underneath
the side table. See Illutrations-6 and 7.
Step 9
Using a combination of the spit rod sections,
securely assemble the spit rod to a length that
will rest on both the motor mount bracket and
the spit rod bracket. The two longer sections
Illustration-7
must be the end pieces. Fit the shorter piece(s)
Side Body
in between the longer ones to elongate the spit
Mounting Holes
rod as necessary to fit the width of your grill.
See Illustration 4.
Illustration-8