Electrical Grounding Instructions - Nexgrill 790-0016 Manual De Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IF MISSING OR DAMAGED PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-
Step 10
Slide the rotisserie motor onto the support
bracket. Slide the spit rod into the motor
socket. See Illustration- 8.
Step 11
Lock the right hand side of the spit rod
into the grill body notch. See Illustration-9.
Step 12
Reinstall the cooking grates by following the
instructions contained in the Owner's Manual
for your grill.
READ ALL WARNINGS IN THE OWNER'S MANUAL FOR YOUR GRILL.

ELECTRICAL GROUNDING INSTRUCTIONS:

This appliance is equipped with a three-prong grounding plug for your safety and protection against
possible electrical shock. It must be correctly plugged directly into a properly grounded three-prong
receptacle. DO NOT cut, remove or alter the grounding prong from the plug.
OPERATION THE ROTISERIE:
1.
Your grill was pre-drilled from the factory to include mounting holes for the Universal Parts Universal Rotisserie.
2.
Install the rotisserie motor onto the motor mount bracket by following the instructions contained in this manual.
3.
Ensure that the rotisserie motor is switched to the "OFF"position.
Note: The rotisserie motor is capable of turning up to 12 lbs. of meat.
4.
Holding the spit rod, place one fork onto the rod with the forks pointing away from the motor and slide the fork to
the center of the rod.
5.
Skewer meat with the spit rod and slide the meat to the center of the rod.
6.
Place second fork onto the spit rod with the prongs facing the meat.
7.
Slide both forks tightly against the meat and securely in place by tightening the fork set screws.
8.
Check the balance of the food on the rod by rotating the loaded spit rod loosely in your hands. The rod should
rotate evenly with little effort. Adjust the food accordingly on the spit to achieve a balanced assembly.
9.
Place the loaded spit rod into the motor assembly and support bracket.
10. Close the grill lid and turn the rotisserie motor "ON".
Note: Erratic noises from the motor are a sign of an unbalanced spit rod, which could cause severe damage to
the motor gears. If you hear erratic noises, turn the rotisserie off and readjust the meat.
WARNING: Always use oven mitts/gloves to protect your hands. Metal parts become hot
!
during use. Use extreme caution when handling spit rod and forks to prevent
bodily injury.
11. Always turn the ROTISERIE motor to "OFF" before opening the grill lid.
8999. PROOF OF PURCHASE WILL BE REQUIRED.
INSTALLATION INSTRUCTIONS
WARNING
!
Illustration-9
Grill Body Notch

Publicidad

Tabla de contenido
loading

Tabla de contenido