Emtec H340 Guia Del Usuario página 26

Confirm with your original remote that the equipment works correctly.
Make sure that you have pressed the corresponding mode key of the equipment or device that
you want to control.
If the listed code does not work, try the AUTOSEARCH method or enter the next code of that
brand.
To find the corresponding code for your equipment use the automatic search.
Check that the batteries have the correct polarity position.
The programming of the remote requires 2 AAA alkaline batteries (new). If the remote loses
codes within a few days/weeks the problem can be solved by using 2 new batteries from the
same brand.
If the backlight of the LCD screen is very weak, in general it will be necessary to replace the
batteries.
- 23 -