Before Operation - Cramer 7400086 Manual De Instrucciones

EN
To reduce the risk of injury, user must read
and understand user's manual before using
this product.
Precautions that involve your
safety.
Do not operate on inclines greater than 16.7°.
IPX4
All weather proof

Before Operation

The safe use of this product requires an understanding of the features on the
product and the information in the operator's manual. Before use of this product,
familiarize yourself with all operating features and safety rules. (see Figure 1)
1 Power switch
2
Forward/Reverse button
3 High/Low speed button
4 Lock-out button
5 Thumb paddle
6 Bucket
7 Bucket release lever
8 Bolt
9 Nut
10 Gasket
6
cramer.eu
11 Washer
12
Battery cover
13 Battery
14 Battery key
15 Brake
16 Caster wheel
17 Front wheel
18 Drain plug
19 Oil plug
Assembly
WARNING!
To prevent accidental starting that could cause serious
personal injury, always remove the batterypack from the tool
when assembling parts.
WARNING!
Do not use this product if any parts on the Packing List are
already assembled to your product when you unpack it.
Parts on this list are not assembled to the product by the
manufacturer and require customer installation. Use of a
product that may have been improperly assembled could
result in serious personal injury.
WARNING!
Do not attempt to modify this product or create accessories
not recommended for use with this product. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
Attach the Upper Handle
(see Figure 2)
1 Slide the upper handle over the lower handle tubes on the bucket assembly.
Make sure the bolt holes align.
2 Insert a bolt from the outside of the handle, passing through the bolt hole
where the upper and lower handles attach.
3 Connect connector and attach cable with stripes.
4 Attach the washer and gasket through.
5 Install and turn clockwise the nut to tighten the bolt.
6 Install the other three bolts in the same way.