Descargar Imprimir esta página

EHEIM 1250 Instrucciones página 9

Ocultar thumbs Ver también para 1250:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
flows to the pump. Do not insert power supply plug until you have done this.
A brief noise when the pump starts up is normal. For outdoor installation. There
are several alternatives for using the hobby pump; when used out of the water it
is preferable to work through the suction nozzle with a hose. If the pump is used
in the water, it may be operated only through the incorporated prefilter. For this
purpose remove the suction nozzle and cover the suction aperture with the atta-
ched cap.
There are two optional connection variations on the pressure side: the thread-ed
adaptor for assembly of a pressure hose or an adaptor for the ascending pipe.
B/ C Both fixing strips can be transposed for universal pump assembly.
After the notch is released, the strip can be removed and, if desired,
slid into another guideway. For this purpose first remove the stops on
the upper bevelled edges of the pump body.
Servicing and maintenance
D / E Remove power supply plug. Remove suction grille (squeeze sides
lightly) and rinse coarse filter under running water.
If water is badly contaminated, clean filter more frequently. If pump is badly
contaminated on suction or pressure side, this will simply lead to noise – time
for a thorough cleaning.
Release pump cover (D) and remove pump parts as per drawing ( ). Clean
pump vigorously with set of EHEIM cleaning brushes (order no. 4009570) as
shown in fig. E: Clean pump parts under running water and reassemble in
same sequence.
Function
a
F
Pump complete with coarse filter
ing pipe
The water intake of the pump occurs through the incorporated prefilter. Slip
regulating clip over hole of pipe. Place the riser pipe into the adaptor and
attach the nozzle head.
ccessory
6
It is possible to connect a bypass valve (order no. 3052400) between
the adaptor and nozzle head, which allows the regulation of fountain
heigt. It is possible to connect a hose (order no. 4003940 or 4004940)
for waterfall or ornament etc.
Universal centrifugal pumps 1250219 - 1250499
Similar to 1250019, but with 1.7 m PVC-cable. Not suitable for outdoor use,
neither in swimming pools nor garden ponds.
Impeller 1250/3250 cannot be used for 1050/3150 and vice versa.
Fountain pumps 3250010 - 3250200
Model: see type plate on pump housing
e
nozzle head.
– not suitable for outdoor use –
Model: see type plate on pump housing
b
c
cap
adaptor piece
d
ris-

Publicidad

loading

Este manual también es adecuado para:

325042906112906162