GPO Soho Manual De Instrucciones página 9

REMOVING THE STYLUS (NEEDLE)
1. Lock the TONEARM (2) on the TONEARM REST (4) by pushing the
TONEARM LOCK (3) to the left.
2. Remove the white protective Stylus Cover (if necessary).
3. Hold the bottom of the CARTRIDGE (14) with your thumb & index
finger as shown below in Fig. 3a. With your other thumb carefully
push down on the top edge of the Red Stylus Assembly (Red piece
includes the needle) until the Stylus Assembly separates from the
CARTRIDGE (14) as shown in Fig 3b.
4. Carefully remove the entire Stylus Assembly from the Cartridge by
pulling the Stylus Assembly away from the CARTRIDGE (14) (FIG
4a).
3A 3B 4A
9