Precautions; Overview; Features; Components - Sony BKM-39H Manual De Instalación

Precautions

• When you assemble the attachment stand, turn off the
monitor power before unplugging the cable. If you attach
the attachment stand with the monitor power on, the
cable may become trapped between the monitor and the
attachment stand, and this may lead to electric shock.
• Install the attachment stand on a steady table. If the
attachment stand is installed on a wobbly or sloping
surface, the monitor may drop down and may cause
personal injury. Make sure that the installation location
is sufficiently strong.
• The use of screws other than those supplied may lead to
injury, because they may loosen or fall out.
• Do not attach the attachment stand to units other than
those specified. If you do, the monitor may drop down
and may cause personal injury.
• Do not climb on the attachment stand or place anything
heavy on it, as this may cause you to fall and injure
yourself or the monitor to crash to the floor.
• Do not touch any sharp points of the attachment stand
with bare hands. When you unpack, carry, attach and
disassemble the attachment stand, wear protective gloves
to avoid injury.

Overview

Features

The BKM-39H Controller Attachment Stand is an
attachment stand for joining Sony 17-type business &
professional video monitors of the BVM/PVM series and a
Sony BKM-16R Monitor Control Unit.

Components

The BKM-39H consists of the following components.
Make sure that you have all the components before
beginning assembly.
Base frames (2)
Stay (1)
Side cover (right) (1)
Side cover (left) (1)
Legs (2)
Cable holders (2)
Screws A (4 × 16 mm) (2)
Screws B (4 × 8 mm) (8)
GB
9
Precautions / Overview