Publicidad
Operation
Auxiliary display for check and reference weighing
Net indicator
Sign
Unreliability
indicator
[ON/OFF]
[Esc]
The measured value is stable as soon as all segments of the stability indicator go out. The
unreliability indicator lights up while the scale is recalculating the reference weight, for example,
during counting, or when it is verified and in the warm-up phase.
Application example: Adding up components (application net total)
If the balance is not set to English: Enter the configuration menu, switch the balance off and on with
[ON/OFF] and, as soon as all segments of the display light up, press and hold [MODE] until
"SPRACHE/LANGUE/DIL/IDIOMA" appears. Press [Enter]; "SPRACHE/LANGUE/DIL/IDIOMA" starts
flashing. Press [Down] repeatedly until "LANGUAGE ENGLISH" appears and confirm with [Enter];
"LANGUAGE ENGLISH" stops flashing. Press [Esc]; the scale finishes starting up.
To enter the application menu, keep [MODE] pressed until "MENU" appears; "SET APP: OFF"
appears. Press [Enter]; "OFF" starts flashing. Press [Down] repeatedly until "NET-TOTAL" appears
and confirm with [Enter]. Press [Down]; "SETUP APPLICATION" appears. Press [Down]; "AUTO-
START ON" appears. For manual value transfer press [Enter]; "ON" starts flashing, press [Down];
"OFF" appears, confirm with [Enter]; "OFF" stops flashing. Press [Esc]; the scale exits the
application menu, starts the application Net total and displays 0g as the measured value and
"STO 0
RES INF" in the info line.
Place the first component, e.g. 50g, and press [REF]; the scale records the value, tares itself and
displays the capacity of the weighing range analogically in the info line. Place the second
component, e.g. 100g, and press [REF], and finally place the third component, e.g. 20g, and press
[REF].
While adding up, the current total weight can be viewed at any time by pressing [MODE]. The
balance then switches to weighing mode. To return to the application, press [MODE] again. To
switch from the analogue display to the application commands in the info line, press [MODE] twice;
the balance switches to the weighing mode and back to the application. It then displays e.g.
"STO 3
RES INF".
Press and hold [REF] until "INF" starts flashing; the balance displays in the info line all information
on the weights just added up. Use [Down] and [Up] to scroll through the entire stack of info lines:
Total, remaining capacity and all individual weights, e.g. 50g, 100g and 20g. Press [Esc] to exit the
information query; the balance switches back to the running application and is ready for another
weighing-in.
To restart, press and hold [REF] until "RES" starts flashing; the balance resets the counter to 0.
To quit the application, press [MODE]; the balance switches back to weighing mode.
[MODE]
[0/T]
[Up]
[Right]
Measured value
[REF]
[PRINT]
[Down]
[Enter]
Stability indicator
Measuring unit
Info line
Function in an
application
Function in a menu
(Navigation)
Publicidad
