Tabla de contenido
Publicidad
Other Play Methods
Random play
You can play all tracks in a random order. After playing all tracks,
the unit stops.
During playback,
MODE
(repeatedly)
To cancel
Press MODE until "RANDOM" goes out, or press 7 to stop the disc.
Notes:
• You can also select Random play in stop mode.
• During Program play, you can not select Random play.
Anti-Shock Protection EX
This function has been developed to achieve excellent performance
against sound interruption caused by vibrations. You will be able
to enjoy listening to music during jogging (not vigorous jogging).
This function is achieved by utilizing the high-performance
servo circuit and audio data that has been stored in the memory
ahead of time (up to 45 seconds worth).
Normally, the "ANTI SHOCK" indicator lights up on the display
and the Anti-Shock Protection EX is in effect.
ANTI SHOCK indicator
4
Program play
You can program up to 20 tracks in any desired order including
the same tracks.
1
During playback or in stop mode,
Track number to be programmed
00: Not programmed yet.
PROG
Program sequence
number
2
Select the desired track.
e.g. Track number 3
3
PROG
Next program sequence
number
The track is registered.
4
Repeat steps 2 and 3 to program other
tracks.
When you program exceeding 20 tracks, the program se-
quence number returns to "01" and will overwrite the previ-
ous setting.
5
The tracks are played in the programmed order.
• To confirm the program
In stop mode, press PROGRAM repeatedly. The programmed
track number will successively appear together with the pro-
gram sequence number. At this time, you can change the pro-
gram, if required.
If the programmed tracks are less than 20, track number "00"
appears for the youngest programmable sequence number, en-
abling further programming.
• To delete the entire program
Turn off the unit, or set the track number to 00 for the first pro-
gram sequencer number, "01".
When the disc is played, as the audio data gradually stored in
the memory, the "ANTI SHOCK" indicator changes as follows:
To cancel
Press the ASP button.
The "ANTI SHOCK" indicator goes out on the display.
(on the unit)
To activate again
Press the ASP button.
Repeat Play
You can repeat one track or all tracks.
During playback,
MODE
(repeatedly)
To cancel
Press MODE repeatedly until the repeat indicator goes out.
Notes:
• You can also select Repeat play in stop mode.
• You can also select Repeat play during Program play.
Intro play
You can successively play the first 10 seconds of every track.
Intro play stops after playing the last track.
1
During playback,
MODE
(repeatedly)
2
Intro play will start from the first track.
Pressing ¢ instead of 3/8 will start Intro play from the
next track. Pressing 4 will start Intro play from the cur-
rent track. When no button is pressed, Intro play will start
from the next track after the current track has finished.
To cancel
Press MODE repeatedly until "INTRO" goes out.
To normally play the track being played
Press 3/8 during Intro play.
Notes:
• You can also select Intro play in stop mode.
• You can also select Intro play during Program play.
Hyper-Bass Sound effect
You can enjoy powerful bass sound.
To get or cancel the Hyper-Bass Sound effect
H.B.S
The display changes as follows.
HBS 1 = HBS 2 = (cancelled)
HBS 2 provides more effect.
Notes:
• During Anti-Shock Protection EX operation, the disc rotates at
a higher rate than usual in order to collect extra audio data.
[Fully stored]
This may cause the batteries to run out faster and could result
in a slight increase in disc rotation noise.
• The Anti-Shock Protection EX function can be switched ON
and OFF during playback. However, this may cause a slight
interruption in the sound because the disc's rotational speed
changes.
(One track)
(All tracks)
(repeatedly)
Publicidad
Tabla de contenido
