Hold; Conference Calls - Panacom PA-7300M Manual Del Usuario

While redialing, when there is no busy signal anymore, the phone will
make an audible sign tol et you know the called has been achieved.
Then you can pick up the handset or press SPEAKER to talk.
Take note of the following guidelines to use the Busy Redial:
• While you dial, the phone line is in used, but during the pause be-
tween calls, the phone line is open to be used by any extension.
• If somebody picks up the handset in an extension or a call enters
into the same line, the Busy Redial get cancelled.
• If you do not answer during the first 60 seconds from the first au-
dible sign, the phone will automatically hang up the call.

HOLD

Use the HOLD button to interrupt a phone conversation without
hanging up; then resume the conversation on the same phone or
an extension.
1. Press HOLD to place a line on hold (the line indicator flashes to
show you it is on hold).
2. Press the line button to resume the conversation
NOTE: While doing this in speaker mode, with the handset on the
base, you must press the SPEAKER button after selecting a line

CONFERENCE CALLS

You can use the Conference Call feature when you have callers on
both lines, and want to have a three-way conversation.
To initiate a conference call:
1. Call the first party.
2. Place first party on hold.
3. Call the second party on the other line.
4. Press CONF.
NOTE: While doing this in speaker mode, with the handset on the base,
you must press the SPEAKERPHONE button after selecting a line.
To end a conference call:
• To disconnect both parties —Hang up
• To disconnect one party—Press the line button of the party to
whom you want to continue speaking.
• To put both parties on hold—Press HOLD.
• To speak to one party individually—Press HOLD; then press the
line number of the party to whom you want to speak (the second
Pg. 11