Settings; Telephone Operation; Line Status Indicator Lights; Speakerphone Location & Use Guidelines - Panacom PA-7300M Manual Del Usuario

into the unit, and then hang up the hand-
set.

SETTINGS

Adjust the volume of the Ringer for each
line changing the position of the Volume
Switch (HI [High], LO [Low] or OFF), until
you get the setting wanted.
Set the PULSE/TONE switch to TONE if
you have Touch-Tone service, or to PULSE
if you have Pulse (rotary) service.

TELEPHONE OPERATION

You can use the telephone by speaking and
listening through the handset, or by using the Speakerphone fea-
ture.

LINE STATUS INDICATOR LIGHTS

This two-line phone is designed for use at multiple stations, the sta-
tus of the indicator lights tells you what is happening on each line.
When the Indicator Light
Off
Red
Flashing Red (Fast)
Blinking Red (Slow)
NOTE: Batteries must be installed for the indicator lights to work.
SPEAKERPHONE LOCATION & USE GUIDELINES
For best speakerphone performance, avoid the following:
• Areas with high background noise. (The microphone might pick
up these sounds and prevent the speakerphone from going into the
receiving mode when you finish talking.)
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or next to
a cabinet, which can generate an echo effect.
Note the following guidelines when you use the speakerphone:
Pg. 8
Is It Means
Line not in use
Line in use
Incoming call
Call on hold