Honeywell MILLER DuraHoist 3Pod Manual Del Usuario página 143

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65
8 – PERIODIC INSPECTION
This equipment must be inspected at least once a year. A Competent person,
properly trained and qualified, must inspect this equipment in compliance with
these instructions and appropriate details of the inspection must be recorded.
At each periodic inspection, complete the form Appendix number VII and
attach a new inspection label with the next inspection date. The frequency of
examination shall be increased according to applicable regulations.
Warranty is void if periodic inspections are not performed and tracked as
described above.
If you detect any failure or damage on your product, or if you have any doubts
regarding its safety, the PPE must be immediately withdrawn from service and
returned to the manufacturer or an authorized service center for inspection or
disposal.
9 - LIFESPAN
The DuraHoist 3Pod is a product made mainly of metal. For our products made up
mainly of metal, we do not indicate a life cycle. It is unlimited, under condition the
product undergoes regular maintenance during the yearly inspection carried out
by competent person. For reliability of this product follow chapter 4-Transport and
Storage and chapter 5-Cleaning.
In case of doubt or damage, do not use the device and send it for expert
inspection/repair at a local Honeywell Service Centre or the factory.
143
NT90025035 rev B.indd 143
19.10.16 9:49

Publicidad

Tabla de contenido
loading

Tabla de contenido