Oven Light - Monogram ZKD90DSSN Manual De Proprietário

Ocultar thumbs Ver también para ZKD90DSSN:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND CLEANING

OVEN LIGHT

WARNING
SHOCK OR BURN HAZARD:
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with
bare hands or a damp cloth can cause burns.
1. Disconnect power at the main fuse or circuit breaker
panel.
2. Remove oven racks.
3. Slide a flat blade screwdriver between the housing and
the glass light cover.
4. Support the glass light cover with two fingers to prevent
careful not to chip the oven coating.
5. Gently twist the screwdriver blade to loosen the glass
light cover.
6. Remove the glass light cover.
49-2000382 Rev.1
7. Remove the bulb by firmly grasping and sliding the
bulb straight out until the two prongs have cleared the
ceramic holder.
8. Do not touch the glass of the new replacement bulb
with your fingers. It will cause the bulb to fail when it
lights. Grasp the replacement bulb with a clean towel or
facial tissue with the prongs facing down. Align the two
prongs in the ceramic holder, pressing gently until the
bulb is securely in the ceramic socket.
9. Slide the protective lens into the holder and push until
the clips snap into the housing.
10. Reconnect power.
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zks90dssnZkd90dpsnZks90dpsn

Tabla de contenido