Care And Maintenance - Emmaljunga Super Nitro Manual De Instrucciones

Ocultar thumbs Ver también para Super Nitro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 222

Care and maintenance

General care and maintenance instructions
• Never expose your vehicle to excessive sunlight for long periods of time.
• Always use a raincover when it is snowing or raining.
• Never store your vehicle in cold and/or damp places.
• Should the chassis become wet, dry it off promptly. Make sure vehicle is completely dry before storing.
• If the vehicle is used near the ocean or salted roads, spray the chassis with a hose, and dry.
• Be careful during transportation and storage as the surface of the chassis is fragile. Scratches that arise
after the sale are not a justifiable complaint.
Routine Inspection
• Regularly clean the chassis and metal parts of the vehicle, dry off and lubricate all joints of the chassis.
Spokes, and fenders on all wheels, should frequently be wiped off with a dry cloth. When the pram is used
during the winter time, cleaning of the pram should be done at least once a week. Lack of maintenance
could cause corrosion on the spokes and fenders. Should corrosion on the surface occur,
which is a possibility, you are required to remove this with car wax.
• It is recommended to lubricate the wheel axles and suspension system every three months (clean axles
with a cloth prior to lubrication). Axles may be lubricated with petroleum jelly or automobile oil.
Check that:
• all chassis locking devices are functioning properly.
• all rivets, nuts and bolts are firmly tightened and not broken.
• all plastic parts are not cracked or broken.
• the wheel bushings are in a good condition.
• all velcros are securely fastened on backrest pocket and seat board flap.
• the press-stud is securely fastened on the footrest flap.
• all elastic straps are in a good condition.
• the secondary locking mechanism is intact and can move freely.
• the parking brake works and the brake rubber is intact.
• the tyre air pressure is correct (only air tyre) (see marking on tyre: 28 P.S.I. = 1,8 bar; 35 PSI = 2,5 bar)
• The handles and the bottom of the carrycot should be inspected regularly for signs of damage and wear.
PLEASE OBSERVE
• When in need of servicing with original parts and other technical issues that require a professional
decision, always get in touch with your retailer where your Emmaljunga product was purchased. All
Emmaljunga products come with a 6-month manufacturing guarantee. This guarantee does not apply
when issues arise through normal wear and tear.
• This information is relevant for Great Britain only.
WARNING
• Tyres can when in contact with PVC-flooring or other plastic materials cause discoloration. Always use
wheel protection if the pram/stroller is stored on delicate surfaces.
Manual Super Nitro v. 3.2
• The parking brake consists of moving parts
and requires regular maintenance for correct function.
• To ensure effective functioning always make sure that the parking brake is well
lubricated. Immediately remove sand, snow, ice and dirt from any moving part of
the braking system.
• Use a silicon or oil based lubricant to lubricate the brake pedal, wheel axle and
brake pins on both sides of the parking brake at least once a month. Also
lubricate the release mechanism on the wheels on a similarly regular basis.
• If you use your Emmaljunga pram/stroller on sandy beaches or under other dirty
and wet conditions make sure to take extra care of the parking brake and
maintain the braking system and wheels as detailed above whenever needed.
37

Publicidad

Tabla de contenido
loading

Tabla de contenido