HON Mentor Serie Instrucciones De Instalación página 3

Illustration 7
Drawer front
DESK AND RETURN
Optional Drawer Pull Installation (refer to Illustration 7):
1. Fully open drawers and locate holes in drawer fronts.
2. Align holes in rear of drawer pulls (from pull pack) with
Drawer pull
3. Use a Phillips screwdriver to install machine screws
Machine
screw
holes in drawer fronts.
(from pull pack) through rear of drawer fronts and into
holes in rear of drawer pulls. Fully tighten screws.
42-2538M
SIDE 3 OF 3 (1/06)