Introduction - 2015 - Dedicated Micros 2010 Manual De Instalación

2010_2015_completeREV5.qxp

4. Introduction - 2015

Manufactured to the highest standards, these enclosures offer weatherproof protection to IP66 of
BS EN.60529 and are available with an adjustable bracket.
Fig. 3 Camera fitment
F
E
Model Shown: 2015
Camera fitment
1. Unscrew 4 cover fixing screws (C) and remove the enclosure cover (A) from the base (B).
2. Release the keyhole screws (D) and slide and withdraw the camera platform (E) from the base.
3. Mount camera (F) onto platform using the 1/4"UNC fixing (I) supplied as shown, ensuring the
fixing insulation bush (J) is between the camera fixing and the platform and the camera
insulation pad (G) is mounted between the platform and the camera. These items isolate the
camera from the surrounding metal work.
4. Finally, wire camera to rear terminal block using circuit diagram for terminal designations.
2010/2015 Installation Manual
22/9/09 2:25 pm Page 4
D
A
B
E
F
C
G
J
I
Page. 4