Ec Declaration Of Conformity; Safety Instructions; General Safety Rules - DeWalt DWE7491 Traducido De Las Instrucciones Originales

NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DWE7491
D WALT declares that these products described
E
under Technical Data are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-1.
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more
information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
Horst Grossmann
Vice President Engineering and Product
Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
01.12.2013

Safety Instructions

WARNING! When using electric tools,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and personal injury
including the following.
Read all these instructions before attempting to
operate this product and save these instructions.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE

General Safety Rules

1. Keep work area clear.
2. Consider work area environment.
3. Guard against electric shock.
4. Keep other persons away.
WALT at the following
E
5. Store idle tools.
6. Do not force the tool.
7. Use the right tool.
8. Dress properly.
9. Use protective equipment.
Cluttered areas and benches invite injuries.
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit (250 - 300 Lux). Do not use the tool
where there is a risk of causing fire or explosion,
e.g., in the presence of flammable liquids and
gases.
Avoid body contact with earthed surfaces (e.g.,
pipes, radiators, cookers and refrigerators).
When using the tool under extreme
conditions (e.g., high humidity, when metal
swarf is being produced, etc.), electric safety
can be improved by inserting an isolating
transformer or a (FI) earth-leakage circuit-
breaker.
Do not let persons, especially children, not
involved in the work, touch the tool or the
extension cord and keep them away from the
work area.
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
It will do the job better and safer at the rate to
which it was intended.
Do not force small tools to do the job of a heavy
duty tool. Do not use tools for purposes not
intended; for example do not use circular saws
to cut tree limbs or logs.
Do not wear loose clothing or jewellery, as
these can be caught in moving parts. Non-
skid footwear is recommended when working
outdoors. Wear protective hair covering to
contain long hair.
Always use safety glasses. Use a face or
dust mask if working operations create dust
or flying particles. If these particles might be
considerably hot, also wear a heat-resistant
apron. Wear ear protection at all times. Wear a
safety helmet at all times.
ENGLISH
37