Belkin AutoSwitch F1U119 Manual Del Usuario página 28

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

P73074/F1U119/AM/man.qxd
Addendum: Disabling Bi-directional
Communication for HP Printer
Special Instructions for advanced users (only if you are still having
problems printing):
1. "Printer Port Set to ECP" or to "Printer Port in Device Manager"
Boot Windows
Select "Properties"
Select "Device Manager" tab
Double-click on "Ports (Com & LPT)"
Double-click on "ECP Printer port" or "Printer Port (LPT1)." If your
configuration is already "Printer Port," this correction does not apply
Select "Driver" tab
Select "Change Driver"
Select "Show all devices"
Under "Models:" Select "Printer port," then click "OK"
Click "OK" again
Shut down Windows
2. Port Resource Settings Incorrect (e.g. Compaq PCs)
Right click on "My Computer"
Select "Properties"
Select "Device Manager" tab
Double-click "Ports (COM & LPT)"
Double-click "LPT"
Select "Resources" tab
De-select "Automatic Settings"
Change "Basic Configuration," find the configuration that meets the
following conditions:
The settings need to be set for:
Input/Output Range 0378-037F
Input/Output Range 0778-077F
Interrupt Request 07
NO DMA
Select "OK"
Shut down Windows
4/19/00
4:25 PM
®
95/98 and right click on "My Computer" icon
®
95/98 and Reboot
®
95/98 and Reboot
24
Page 24
(continued)

Publicidad

Tabla de contenido
loading

Tabla de contenido