CARE ERGOS V Manual Del Usuario página 17

KILOJOULE 0~9995
WATT 20~350
Pulse 40~220
Quick Start Program
After power-up, press the QUICK START PROGRAM key to enter Quick Start Program, start pedaling to begin
workout at this time. Press the UP or DOWN key to adjust resistance load during workout.
Manual
Setting Parameters for Manual
Selecting "Manual" using the MANUAL PROGRAM key , then pressing the MODE key. The 1
"Time" will flash so value can be adjusted using the UP or DOWN key .Press the MODE key to save value &
move to next parameter to be adjusted. Continue through
all desired parameters, start pedaling to start workout.
"Manual" Operating Instructions
Press the MANUAL PROGRAM key (Select Manual Mode using the MANUAL PROGRAM Key)
Press the MODE key or Start Pedaling to start workout.
" Time" flashes ,press the UP or DOWN key
Press the MODE key
"Distance" flashes , press the UP or DOWN key
Press the MODE key
"Kilojoule" flashes ,press the UP or DOWN key
0.0 ±5
20/100 ±5
90 ±1
will count down to 0.
1.When display is 0.0,
KILOJOULE will count up.
2.When KILOJOULE is 5~9995,
it will count down to 0.
WATT value can be set only in
Watt/Test program
When Heart Rate exceeds set
range, user will be alerted.
St
parameter