Morso 6191 Manual Del Usuario página 7

4. The two handles (included) are
only used for lifting and lowering
the heat storage elements. The
handles are removed after the
heat accumulation elements have
been lowered in place. They will
not be needed again.
Flue to the rear
with a low top
module
5. The regulator disk assembly is
positioned so that it falls in place
with the three legs on the top mo-
dule.
The regulator disks are con-
structed so that the regulation
lever may be placed to the right or
to the left.
When the flue is upwards, the
centre piece must be removed.
The three small bridges may be
cut with a hacksaw blade.
Finally, the top cover is put in
place so that it rests on the three
legs on the top module.
Flue upwards
with a low top
module
Flue to the rear
with a tall top
module
Flue to the rear
Flue upwards
with a tall top
module
Flue upwards
7