Morso Airtight 6100 Manual Del Usuario página 6

Fitting the fresh air system/air kit for the Morsø 6100 series
To fit the fresh air system/air kit you must first remove the external cast back panel.
1. Remove/lift off the top cast top panel which is
lying loose on the stove.
2. The top frame holds the side panels and back panel
in place on top of the stove. As it can be difficult to
hold both the side panels and back panel without
them falling out, we recommend stretching some
cord around the stove as a precaution before re-
moving the top frame.
3. Remove the 4 screws in the cast top frame and
then the cast back panel.
4. Unscrew the angle fitting in the bottom of the
cast air duct on the back of the stove.
5. Unscrew the radiation shield at the bottom of
6140.
6