Alarm; Temperature - Oregon Scientific RMR682 Manual Del Usuario

Termômetro interior / exterior sem fio com relógio rádio controlado de ajuste automático
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
To manually set the clock:
1. Press and hold MODE for 2 seconds.
2. Press
and
to change the settings.
3. Press MODE to confirm.
4. The setting sequence is: time zone offset, 12 /
24 hour format, hour, minute, year, date / month
format, month, date, and display language.
NOTE The time zone offset can be used to set the
clock up to + / - 9 hours from the received clock signal
time. If you have disabled the clock signal reception
(i.e. manually setting the clock), do not set a value for
time zone offset.
NOTE
The language options are (E) English, (F)
French, (D) German, (I) Italian, and (S) Spanish.
To switch the clock display:
Press MODE to toggle between:
Clock with seconds
Clock with day
Calendar

ALARM

To set the alarm:
1. Press ALARM to view the alarm.
display.
2. Press and hold ALARM for 2 seconds.
3. Press
or
to change the hour / minute settings.
4. Press ALARM to confirm.
To activate or deactivate the alarm:
Press ALARM when in the alarm display.
when the alarm is set.
To silence the alarm and reset it for the next day:
Press ALARM.

TEMPERATURE

To toggle the temperature unit:
Press °C / °F.
To view outdoor sensor temperature readings:
Press CHANNEL.
To auto-scan between sensors:
Press and hold CHANNEL for 2 seconds. Each
sensor's data is displayed for 3 seconds.
To end auto-scan:
Press CHANNEL or MEM.
will show on the
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear all records:
7
shows which remote sensor's data you are
viewing.
is permanently displayed in the indoor
temperature area.
appears

Publicidad

Tabla de contenido
loading

Tabla de contenido