Publicidad
Idiomas disponibles
Idiomas disponibles
Filling with water
(for steam-ironing, "Shot-of-
steam" and "Jet-of-steam")
• Please fill with normal tap water before using
for the first time. Maximum filling is 0.62 litre.
• Also use tap water to refill the tank. If the tap
water is very hard (over 10°DH), it is advisable
to mix it with demineralised or distilled water
(50% tap water and 50% demineralised or
distilled water).
• Never use perfumes, vinegar, descaling agents
or other chemicals.
• Do not use water from a water softener.
• During steam-ironing, the system will
automatically pump water from the water tank
into the steam tank.
Table
Label with
ironing
instructions
B
C
D
Z
Kind of
Temperature
textile
dial
Synthetic
e.g. acetate,
acrylic,
viscose,
polyamide,
polyester.
Silk
Wool
Cotton
MAX
Linen
Please note: This article cannot be ironed!
Filling before you start ironing
2
- Make sure that the steam tank and the iron are
both switched off. Remove the mains plug from
the wall socket.
- For easy and safe filling the water tank can be
removed (fig. 2) and filled under the tap (fig. 3).
Steam-
ironing
MIN
|
|
1
–
|
|
A
|
2
A
MIN
|
3
MIN
5
3
Shot of
steam
–
MAX
MAX
MAX
Jet of steam
Publicidad
