Philips HI 994 Manual Del Usuario página 8

"Shot-of-steam"
• Applying "Shot-of-steam" (i.e. high steam
output coming from a limited number of holes
in the soleplate) can help remove stubborn
wrinkles over a large area.
- Always set the temperature dial (K) to the
steam range (2 or 3).
Otherwise the
soleplate is not hot
enough so that water
may drip from it.
- Press button (H) and
the steam activator (J)
(fig. 14).
"Jet of steam"
• Applying "Jet-of-steam" can help remove
stubborn wrinkles.
- Press button (G) and steam activator (J) (fig.
15).
• It is not necessary to
set the temperature
dial (K) to the steam
range for "Jet-of-
steam".
14
15
Steaming in a vertical position
16
Hanging curtains and
clothing (jackets,
woman's suits, coats)
can be steamed by
holding the iron in a
vertical position (fig. 16).
"Jet of steam" (fig. 17)
and "Shot-of-steam"
(fig. 18) can be applied
as well in a vertical position.
Dry-ironing
For ironing without
steam set the steam
control (I) to position O
(fig. 19). Steam activator
(J) is now blocked and
no steam can come to
the iron. Also "Shot-of-
steam" and "Jet-of-
steam" do not function.
You can also switch off
the steam tank (D).
8
17
18
19
0