Maintenance And Servicing; Ec Declaration Of Conformity - Denios HW Manual De Instrucciones

Maintenance and servicing

•
Check moving parts for ease of movement and if necessary lubricate with commercially-available
grease.
•
Check screw connections
•
Regular tests to be carried out at intervals of at the longest one year by a qualified person.
•
In the event of damage and particular incidents that could influence the carrying capacity and after
repairs an extraordinary testing by a qualified person is to be carried out.
•
Before a sight and function check under some circumstances prior cleaning of the handling system may
be necessary. That applies particularly if they are contaminated with materials e.g. dyes and salts from a
previous use.
•
The test regime for a sight and function test includes fissures, deformities, cracks, damage, wear,
corrosion damage and function faults of the handling system.
•
As proof that the tests have been carried out, a test list is to be compiled and kept by the operator.
•
With visible deformities, obvious damage, heavy wear of the screws and screw guides the handling
system must not be used until repaired.
Declaration of conformity
Herewith we, the DENIOS AG, Dehmer Straße 58-66, D 32549 Bad Oeynhausen, declare that the product
complies with following guidelines.
Type:
EC Directives
Machinery directive 2006/42/EC
Harmonised standards applied
EN 13155
EN 349
EN ISO 14121
EN 12100 -1,-2
Person responsible for documentation
Mr. Dr. Ing. R. Adenstedt
Head of engineering
Scherengreifer HW
115258

EC Declaration of Conformity

Scissors gripper HW
Seite 7 von 12 Seiten
DENIOS AG, 04.01.2010
Theodor Breucker
- Board of governors -
Ausgabe01/2010