ABB 6955EB-102-500 Manual De Instrucciones página 46

Installation
NOTE
1. When installing several devices (e.g., in the ceiling), care
must be taken that there is a minimum space of 20 cm
between the devices.
2. In order to achieve maximum dimmer capacity, ensure
that the device will be adequately ventilated when
installed. With an ambient temperature of 35°C and
over, the installed load must be reduced (see Fig. 3),
otherwise there is a risk of destruction.
3. Controlled outputs should not be connected in pa-
rallel.
Switch off supply voltage!
NOTE
If, when installing the device, the physical address has not
yet been allocated, the programming button (Fig. 1, Pos. 3)
must remain accessible.
GB