Craftsman 919.195414 Manual De Instrucciones página 4

WHAT CAN HAPPEN
• It is normal for electrical contacts
within the motor and pressure
switch to spark.
• If electrical sparks from compressor
come into contact with flammable
vapors, they may ignite, causing
fire or explosion.
• Restricting any of the compressor
ventilation openings will cause
serious overheating and could
cause fire.
• Unattended operation of this
product could result in personal
injury or property damage. To
reduce the risk of fire, do not
allow the compressor to operate
unattended.
WHAT CAN HAPPEN
• The compressed air directly from
your compressor is not safe for
breathing. The air stream may
contain carbon monoxide, toxic
vapors, or solid particles from
the air tank. Breathing these
contaminants can cause serious
injury or death.
HAZARD
RISk OF ExPLOSION OR FIRE
HAZARD
RISk TO BREATHING (ASPHYxIATION)
4- ENG
HOW TO PREVENT IT
• Always operate the compressor
in a well ventilated area free of
combustible materials, gasoline, or
solvent vapors.
• If spraying flammable materials,
locate compressor at least 20 feet
(6.1 m) away from spray area. An
additional length of air hose may be
required.
• Store flammable materials in
a secure location away from
compressor.
• Never place objects against or on
top of compressor.
• Operate compressor in an open area
at least 12" (30.5 cm) away from
any wall or obstruction that would
restrict the flow of fresh air to the
ventilation openings.
• Operate compressor in a clean, dry
well ventilated area. Do not operate
unit indoors or in any confined area.
• Always remain in attendance with
the product when it is operating.
• Always turn off and unplug unit
when not in use.
• Operate compressor in a clean, dry
well ventilated area. Do not operate
unit in any confined area. Store
indoors.
HOW TO PREVENT IT
• Air obtained directly from the
compressor should never be used to
supply air for human consumption.
In order to use air produced by this
compressor for breathing, suitable
filters and in-line safety equipment
must be properly installed. In-line
filters and safety equipment used
in conjunction with the compressor
must be capable of treating air to all
applicable local and federal codes
prior to human consumption.