Botboundary Strip; The Sharkclean App; Download The App; Wi-Fi Troubleshooting - Shark ION ROBOT RV750EU Instrucciones

USING THE SHARK® ION ROBOT

BotBoundary Strip

To keep your Robot away from certain areas, such as pet bowls, fragile objects, wires,
or doorways, use the BotBoundary strip to quickly and easily create "no-go zones".
BotBoundary strips
BotBoundary strips
Identify areas or objects you want the Robot to avoid.
20cm
Min.
Generally, botboundary strips are not needed
on stairs because your Robot's cliff sensors will
prevent it from falling off ledges. For your Robot's
cliff sensors to work properly, all runners, rugs,
or carpets must be at least 20cm from any stairs
(or extend over the edge of the stairs.)
If a runner, rug or carpet edge is less than
20cm from the stairs and can't be moved,
use a BotBoundary strip to block off the stairs.
NOTE: To prevent bumping, place strip at least 5cm in front of the object you want to block off.
16
sh arkclean.eu
Cut the BotBoundary strip to the desired length
(45cm minimum) so that it spans the length
of the doorway or object you want to block off.
Use the BotBoundary strip supplied in the box to
create 'no-go' areas. Simply cut the BotBoundary
strip to size and place in front of areas that you want
the Robot to avoid.
USING THE SHARK IQ ROBOT USING THE SHARK ROBOT

THE SHARKCLEAN APP

DOWNLOAD THE APP

Download the SharkClean App using an Android or IOS smartphone,
CREATE AN ACCOUNT
Step 1: Enter your email address.
Step 2: Enter a password.
Step 1: Click on the menu button in the SharkClean
App and 'Add a Robot'.
Step 2: Click on 'Get Started'.
Step 3: Switch your Robot into the 'ON' position.
Step 4: Find a good home for your Robot Charging
Dock.
Step 5: Pair your phone to the Shark® ION Robot by
pressing the left and right buttons on your
Shark® ION Robot.

WI-FI TROUBLESHOOTING

To use the App, your phone must be connected to a 2.4GHz network.
• The App will only work on a 2.4GHz network.
• Typical home Wi-Fi networks support both 2.4GHz
and 5GHz.
• Do not use a VPN or a proxy server.
ERROR CODE
! (RED) + Wi-Fi indicator (RED Flashing)
! (Flashing red) + Wi-Fi (RED)
! + Wi-Fi (Flashing RED alternately)
! + Wi-Fi (Flashing RED at the same time)
Step 3: Confirm your email.
Step 4: Sign in to the SharkClean App with your
email and password.
ADD A ROBOT
Step 6: Select 'SharkXXXXXXXXXXX' in your
WI-FI settings, and then return to the
SharkClean App.
Step 7: Select your WI-FI network and enter your
WI-FI password.
Step 8: Wait 1-2 mins for your Shark® ION Robot to
connect to WI-FI.
Step 9: Start cleaning!
• Make sure Wi-Fi isolation is turned off on the
router.
• For technical support please visit sharkclean.eu
PROBLEM
Wrong password for Wi-Fi
SSID cannot be found, try connecting again
Wrong user name or password for your Shark account
Cannot connect to Wi-Fi
s h a r kc l e a n . e u
17