Intended Use For The Dexter Power Rotary Hammer; Safety Instructions - Dexter 1500RH2-50.5 Instrucciones Legales Y De Seguridad

FR

1. INTENDED USE FOR THE DEXTER POWER ROTARY HAMMER

ES
MAIN PURPOSE:
• This tool is designed to break, scale and drive concrete or similar materials.
Check that all parts are present
PT
• Carefully remove the tool from its packaging and check that the following parts are present:
1 x Rotary hammer
1 x Auxiliary handle
IT
1 x Depth gauge
1 x Dust shield
EL
1 x Wrench
1 x Key chuck with adaptator
PL
If any parts are missing or damaged, please contact our Customer Services on the number provided on the front page.
UA

2. SAFETY INSTRUCTIONS

RO
General Power Tool Safety Warnings
EN
1. Work area safety
a) Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away
from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
WARNING ! Read all safety warnings and all instructions
Failure to follow all instructions listed below may result in electric shok,
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term «power tool» in the warnigs refers to your main-opaerated (corded)
power tool or battery-operated (cordless) power tool.
115