Parts Identification; Preparation; Charging The Shaver - Panasonic ES‑LV9Q Instrucciones De Operación

Parts identification

A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth rollers
• They help to glide over
the skin more easily.
5 Foil frame release
buttons
6 Power switch
7 Lamp display
a. Used time lamp
b. Battery capacity
lamp
c. Shaving sensor lamp
( )
d. Clean lamp ( )
e. Switch lock lamp
( )
f. Foil/blade check
lamp ( )
g. Charge status lamp
( )
8 Appliance socket
9 Outer foil section
: System outer foil
release buttons
; Inner blades
< Trimmer
= Trimmer handle
> Main body rear
terminals
ES-LV9Q_EU.indb 13
B Self-cleaning recharger
? Charging terminals
@ Cleaning liquid unit
removal button
A Intake port
B Self‑cleaning recharger
socket
C Lock release lever
D Cleaning liquid filter
 Cleaning liquid unit
 STATUS lamp
 LOW lamp
 CLEAN lamp
 DRY lamp
 SELECT button
C AC adaptor (RE7-87)
 Adaptor
 Power plug
 Cord
 Appliance plug
Accessories
D Travel case
E Cleaning brush
F Oil
G Special detergent
(Detergent)
H Operating Instructions
I Guarantee Card
There may be water droplets inside the self‑cleaning
recharger at the time of purchase, but there is no problem
regarding the hygiene or the performance. (It is a residue of
the distilled water used for performance test.)

Preparation

Charging the shaver

• Turn the shaver off.
• Wipe off any water droplets on the main body rear terminals.
1
Insert the appliance plug
[C] into the self-cleaning
recharger [B]�
2
Remove the protective cap
[A1] while pressing the side
of the cap and insert the
shaver into the self-cleaning
recharger�
• Slowly insert the shaver into the
self‑cleaning recharger taking care
not to damage the system outer foil.
3
Plug the adaptor [C] into a household outlet�
• Check that the charge status lamp (
• Charging is completed after approx. 1 hour.
2
3
1
) is glowing.
13
2017/12/22 9:13:13