Turn Clock Reception On / Off; Set Clock - Oregon Scientific BAR989HG Manual De Usuario

ICON MEANING
The unit has lost contact with the
remote sensor but the time is
synchronized.
The unit has lost contact with the
remote sensor and the time is not
synchronized.
The unit cannot reach the remote
sensor.
NOTE To force a manual search for the clock signal
reception, press and hold SEARCH on the sensor for 2
seconds.

TURN CLOCK RECEPTION ON / OFF

If you wish to manually set the clock, you must first
disable the clock radio signal reception feature. To do
this, navigate to the Clock / Alarm Area. Then, press
and hold DOWN on the main unit for 2 seconds. To
enable it, navigate to the Clock / Alarm Area, then press
and hold UP for 2 seconds.
Clock radio reception enabled:
BAR989HG_M_EN_op.p65
Clock radio reception disabled:

SET CLOCK

You only need to do this if you have disabled clock radio
signal reception, or if you are too far from the radio signal.
1. Press SELECT to navigate to the Clock Area. will
2. Press and hold MODE for 2 seconds.
3. Select the time zone offset hour (+ / -23 hours), 12 /
4. Press UP or DOWN to change the setting.
5. Press MODE to confirm.
NOTE
(F) French, (D) German, (I) Italian, and (S) Spanish. The
language you select determines the weekday display.
NOTE
is set, the time shown will be Pacific Time. To change to
another US time zone, select an hour offset accordingly.
The time zone options and their related hour offset times
are Pacific (UTC-8), Mountain (UTC-7), Central (UTC-
6) and Eastern (UTC-5).
16
16
show next to the Area.
24 hour format, hour, minute, year, date / month
format, month, date and display language.
The language options are (E) English,
BAR989HGA only - If no time zone hour offset
2005.9.17, 12:24 PM